Frequently Asked Questions

Note: Please see Video Instructions and PDF instructions for tips on using your MAX FORCE TOY GUNS.

Tips on Operating your MAX FORCE TOY GUN

• + Using and Loading SOFT SPLAT Ammo

• *Always soak ammo completely in water for AT LEAST 10 seconds before loading into your MAX FORCE TOY GUN.

  * Ammo should be completely soaked – the more saturated the better. Only soak ammo in water.

  * Load ammo on the side of the MAX FORCE CLIP with the RED DOT – NOT THE “X”.

  * Push ammo completely in each chamber of the MAX FORCE clip.

  * ONLY USE MAX FORCE SOFT SPLAT PELLETS IN MAX FORCE TOY GUNS.

  * ONLY Load 1 pellet per chamber. Do NOT LOAD DIRTY pellets into chamber as this may affect performance of your MAX FORCE TOY GUN.

• + Loading MAX FORCE clips into MAX FORCE TOY GUNS

• * ALWAYS load MAX FORCE clips into the left side of the gun.

  * When loading clips into the toy guns, ALWAYS match the markings on the clips with the markings on the toy guns. The RED DOT should face towards the stock and the X should face towards the barrel.

  * DO NOT FORCE CLIPS INTO MAX FORCE GUNS. They should slide in EASY.

  * DO NOT LOAD CLIPS into the right side of the toy gun.

  * TO REMOVE THE CLIPS, always PULL clip from the right – DO NOT PULL from the left. (Clips only flow through the toy guns left to right.)

  * If Clip gets jammed, press the red or orange button on the right side of the toy gun and PULL to the right.

• + TIPS ON FIRING MAX FORCE TOY GUNS.

• *For MAXIMIZER - Pull orange handle COMPLETELY back and RELEASE. DO NOT PUSH handle forward. This will impact the performance of the toy gun.

  * For SHADOW HAWK – Pull orange power piston handle COMPLETELY back and RELEASE. DO NOT PUSH OR SLIDE the handle forward. ONLY RELEASE THE HANDLE when you have aimed and are ready to fire.

  * For TERRORNATOR– COMPLETELY PUSH THEN COMPLETELY PULL the Power Piston Firing Handle back and forth. THE FASTER and HARDER you PUSH and PULL the better the shooting distance. Remember the harder you push the farther it shoots.

  * For Blow Gun – DO NOT put the orange part of the blowgun IN YOUR MOUTH. Make sure there is NO air leaking from the sides of the orange blow area when firing your blow gun. The HARDER you blow air into the gun, the farther the pellets fly.

  * ALWAYS WEAR MISSION GLASSES WHEN USING MAX FORCE.

• + The Ammo is clogged or stuck in the MAX FORCE TOY GUN – how to I remove or clean the barrel.

• Just insert a DRY Soft splat pellet in the END of the barrel or toy gun and push it down the barrel with a long thin object.

  OR Run warm water down the barrel.

• + My MAX FORCE Toy Gun isn’t shooting far?

• Read TIPS ON FIRING MAX FORCE TOY GUNS from above.

  PULL BACK Power Pistons ALL THE WAY and then release.

• + What is MAX FORCE SOFT SPLAT Ammo made of?

• It is a special blend of paper and wood and is biodegradable.

• + Can I use ANY OTHER AMMO in my MAX FORCE TOY GUN?

• NO. This is NOT recommended as it may impact performance. Always use Max Force Soft Splat Pellets.

• + My Ammo dried in the clip.

• Just dunk the clip in water for 10 seconds or more to rehydrate the pellets.

Safety

SAFETY is our NUMBER 1 priority.

• + Will SOFT SPLAT PELLETS injure or hurt someone?

• NO. The impact of the ammo MAY sting, but will not cause injuries. ALL MAX FORCE ITEMS PASSED STRICT SAFETY STANDARDS. You should NEVER fire Max Force into ANYONE’S FACE OR EYES.

• + How do you dispose of MAX FORCE SOFT SPLAT AMMO?

• Since the ammo is paper, it is biodegradable. Just throw it away after use.